Application Progress in the Preparation of Eco-Friendly Composite Ceramics from Solid Waste
DOI:
https://doi.org/10.63333/eem.v1n22Keywords:
Solid waste, Environmental protection, Composite ceramics, Green manufacturingAbstract
Against increasingly prominent resource and environmental issues, the resource utilization of solid waste has become a research hotspot. The preparation of environmentally friendly composite ceramics using solid waste as the primary raw material not only facilitates the resource utilization of solid waste and ecological improvement, but also enables low-cost green ceramic manufacturing. This paper focuses on the application of coal-based solid waste, smelting slag, desert sand, and mining tailings in eco-friendly composite ceramics, and points out some challenges encountered in the practical application and development of converting solid waste into composite ceramic raw materials.
References
[1] Li S.H., Du H.Y., Guo A.R., et al. Preparation of self-reinforcement of porous mullite ceramics through in situ synthesis of mullite whisker in flyash body. Ceramics International, 2012, 38(2): 1027-1032. https://doi.org/10.1016/J.CERAMINT.2011.08.026
[2] Peng B., Ding X., Zhao Y.X., et al. Preparation of mullite whiskers from high alumina fly ash and its reinforced porous structure. Journal of Materials Research and Technology-JMR&T, 2023, 24: 3323-3333.
[3] Ma B., Li Y., Cui S.P., et al. Preparation and sintering properties of zirconia-mullite-corundum composites using fly ash and zircon. Transactions of Nonferrous Metals Society of China, 2010, 20(12): 2331-2335. https://doi.org/10.1016/S1003-6326(10)60650-4
[4] Ma B., Su C., Ren X.M., et al. Preparation and properties of porous mullite ceramics with high-closed porosity and high strength from fly ash via reaction synthesis process. Journal of Alloys and Compounds, 2019, 803: 981-991. https://doi.org/10.1016/J.JALLCOM.2019.06.272
[5] Nguye M., Sokolar R. Formation and influence of magnesium-alumina spinel on the properties of refractory forsterite-spinel ceramics. Materiali In Tehnologije, 2020, 54(1): 135-141. https://doi.org/10.17222/mit.2019.198
[6] Nguye M., Sokolar R. Impact of fly ash as a raw material on the properties of refractory forsterite-spinel Ceramics. Minerals, 2020, 10(9): 835-835. https://doi.org/10.3390/min10090835
[7] Wang H., Chen Z.W., Zhao M., et al. Integrated utilization of coal gangue for synthesis of β-Sialon multiphase ceramic materials. Ceramics international, 2023, 49(7): 11275-11284. https://doi.org/10.1016/j.ceramint.2022.11.326
[8] Lian W., Liu Z.Y., Zhu R., et al. Effects of zirconium source and content on zirconia crystal form, microstructure and mechanical properties of ZTM ceramics. Ceramics international, 2021, 47(14): 19914-19922. https://doi.org/10.1016/j.ceramint.2021.03.327
[9] Qin M., Tian Y.M., Hao H.L., et al. Effects of CaCO3 additive on properties and microstructure of corundum- and mullite-based ceramic proppants. International journal of applied ceramic technology, 2020, 17(3): 1026-1032. https://doi.org/10.1111/ijac.13470
[10] Zhao L.H., Wei., Bai H., et al. Synthesis of steel slag ceramics: chemical composition and crystalline phases of raw materials. International Journal of Minerals, Metallurgy and Materials, 2015, 22(3): 325-333. https://doi.org/10.1007/s12613-015-1077-z
[11] Wu J.F., Zhang C., Xu X.H., et al. Preparation and characterization of alumina/calcium-hexaluminate ceramic composites from ferrotitanium slag. Journal of the European Ceramic Society, 2020, 40(12): 4265-4275. https://doi.org/10.1016/j.jeurceramsoc.2020.05.004
[12] Liu J.C., Su Z.J., Xu J.M., et al. Thermal storage performance of NaNO3/cordierite-mullite ceramic (CMC) composites deriving from metallurgical slag. Ceramics international, 2023, 49(23): 38094-38102. https://doi.org/10.1016/j.ceramint.2023.09.139
[13] Wang S.H., Jin H.X., Deng Y., et al. Comprehensive utilization status of red mud in China: A critical review. Journal of cleaner production, 2021, 289: 125136. https://doi.org/10.1016/j.jclepro.2020.125136
[14] Zanelli C., Dominguez E., Iglesias C., et al. Recycling of residual boron muds into ceramic tiles. Boletin de la Sociedad Espanola de Ceramica y Vidrio, 2019, 58(5): 199-210. https://doi.org/10.1016/j.bsecv.2019.01.002
[15] Nzuki B., Luo L.Q., Zhou P.F., et al. Mineralogical characterization of aeolian sands from Inner Mongolia, China. Journal of Minerals and Materials Characterization and Engineering, 2019, 7(3): 81-102. https://doi.org/10.4236/jmmce.2019.73007
[16] Fan R., Wang W.B., Wang S.H., et al. Microstructure and properties of porous ceramics synthesized using Kubuqi desert sand. SCIREA Journal of Materials, 2022, 7(1): 1-20. https://doi.org/10.54647/materials43168
[17] Wang W.B., Wang Z.D., Wang S.G., et al. Sintering characteristics of environmentally friendly porous ceramics prepared by self-sintering of desert sand. Materials letters, 2022, 324: 132694-132694. https://doi.org/10.1016/j.matlet.2022.132694
[18] Wang Z.X., Shi Z.M., Wang W.B., et al. Synthesis of MgSiO3 ceramics using natural desert sand as SiO2 source. Ceramics international, 2019, 45(11): 13865-13873. https://doi.org/10.1016/j.ceramint.2019.04.084
[19] Zhang Y, Shi Z.M., Wang W. Improvement of phase transformation and densification of SiO2-ZrO2 ceramics by using desert sand as a SiO2 source. Silicon, 2024, 16(3):1357-1375. https://doi.org/10.1007/s12633-023-02763-2.
[20] Fernandes J.V., Guedes D.G., Costa F.P., et al. Sustainable ceramic materials manufactured from ceramic formulations containing quartzite and scheelite tailings. Sustainability, 2020, 12(22): 9417-9417. https://doi.org/10.3390/su12229417
[21] Cechin L., Mymrine V., Avanci M.A., et al. Ceramics composites from iron ore tailings and blast furnace slag. Ceramics international, 2022, 48(8): 10506-10515. https://doi.org/10.1016/j.ceramint.2021.12.260
[22] Liu W.J., Wang Y., Li J.T., et al. Microstructure characteristics and possible phase evolution of the coal gangue-steel slag ceramics prepared by the solid-state reaction methods. Journal Wuhan University of Technology, Materials Science Edition, 2024, 39(4): 921-930. https://doi.org/10.1007/s11595-024-2954-y
[23] Lao X.B., Tu Z., Xu X.Y., et al. An energy-saving and cleaner method for recycling coal gangue and aluminium chips: preparing in-situ nitride whiskers reinforced ceramics for thermal storage. Journal of Cleaner Production, 2023, 383: 135383. https://doi.org/10.1016/j.jclepro.2022.135383
[24] Shi Z.M., Han C., Wang W.B. Preparation and properties of quartz-anorthite ceramics synthesized using desert sand and coal fly ash. Journal of Materials in Civil Engineering, 2023, 35(8): 04023221. https://doi.org/10.1061/jmcee7.mteng-14712
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Dr. Ao Yu, Dr. Wenbin Wang, Junfei Gu, Dr. Wenli Luo, Qi Hu, Linhui Zhou, Xiaoqing Yi, Dr. Zhiming Shi (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Similar Articles
- Wenli Luo, Zhiming Shi, Wenbin Wang, Ao Yu, Zhiwen Liu, Eco-Friendly Cement Clinker Manufacturing Using Industrial Solid Waste and Natural Idle Resources as Alternative Raw Materials , Energy & Environment Management: Vol. 1 No. 2 (2025)
- Oleksii Hrechanyi, Khudiakov Rostyslav, Dernovyi Oleksandr, Vernydub Mykhailo, Mylenkyi Bohdan, Experimental Study of the Process of Obtaining Filament for 3D Printing from Plastic Waste , Energy & Environment Management: Vol. 1 No. 2 (2025)
- Qi Hu, Dr. Wenbin Wang, Dr. Ao Yu, Dr. Wenli Luo, Junfei Gu, Xiaoqing Yi, Linhui Zhou, Dr. Zhiming Shi, A New Environmental-Friendly Approach to Preparing Glass-Ceramics from Desert Sand , Energy & Environment Management: Vol. 1 No. 2 (2025)
- Xuemei Jiang, Tingyin Deng, Wenying Zhang, Application Status, Hotspots, and Future Trends of Artificial Intelligence in the Field of Sustainable Environmental Governance , Energy & Environment Management: Vol. 1 No. 1 (2025)
- Longtian Li, Dr.Tim, Digital Transformation and the Synergistic Evolution of Green Talent Capacity: Theoretical Lineage, Research Progress and Future Prospects , Energy & Environment Management: Vol. 1 No. 2 (2025)
- Tao Zheng, Chao Bian, Xiaohong Sun, Lianyong Wang, Design and Application of Low-NOx Burners in Rotary Kilns , Energy & Environment Management: Vol. 1 No. 1 (2025)
- Leela Kaur, Prem Godara, Application of Principal Component Analysis (PCA) in groundwater quality evaluation: A case study of arid region , Energy & Environment Management: Vol. 1 No. 2 (2025)
- Yi Hu, Shiqi Zhang, Qirui Pan, Chi Cong Nie, Development Trends and Solutions for Comprehensive Energy Services in the Context of Green and Low-Carbon Initiatives , Energy & Environment Management: Vol. 1 No. 1 (2025)
- Mohammad Amini, Longsheng Deng, Waqas Hassan, Reza Jafari, Fatima Zahra Zidane, LNRF-Based Landslide Zonation: Enhancing Risk Assessment in Badakhshan, Afghanistan , Energy & Environment Management: Vol. 1 No. 1 (2025)
- Mohammad Amini, Prof. Longsheng Deng, Fatima Zahra Zidane, Reza Jafari, Spatiotemporal Analysis of Sand Dune Dynamics: A Case Study from Southern Afghanistan , Energy & Environment Management: Vol. 1 No. 2 (2025)
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Qi Hu, Dr. Wenbin Wang, Dr. Ao Yu, Dr. Wenli Luo, Junfei Gu, Xiaoqing Yi, Linhui Zhou, Dr. Zhiming Shi, A New Environmental-Friendly Approach to Preparing Glass-Ceramics from Desert Sand , Energy & Environment Management: Vol. 1 No. 2 (2025)
- Wenli Luo, Zhiming Shi, Wenbin Wang, Ao Yu, Zhiwen Liu, Eco-Friendly Cement Clinker Manufacturing Using Industrial Solid Waste and Natural Idle Resources as Alternative Raw Materials , Energy & Environment Management: Vol. 1 No. 2 (2025)